The uses of THHN cable /Nylon wire of Internation

1. THHN cable /Nylon wire of Internation and hose assembly can only be used to transport the designed materials, otherwise it will reduce the service life or fail.
2. The nylon wire and hose assembly can only be used within its bearing range, and should not be used under pressure exceeding the design working pressure.
3. The temperature of the medium transmitted by the nylon wire and the hose assembly should not exceed -40℃-+120℃, otherwise its life will be shortened. ,
4. The nylon wire and hose assembly should not be used under the minimum bending radius of the hose to avoid bending or bending near the pipe joint, otherwise it will hinder the hydraulic transmission and conveying of materials or damage
Hose assembly.
5. Nylon wires and hose assemblies cannot be used in a twisted state.
6. Nylon wires and hose assemblies should be handled with care during transportation. Do not drag them on sharp or rough ground, and do not bend or flatten the hoses.
7. Nylon wires and hose assemblies should be kept clean, and the inside should be cleaned to prevent foreign objects from entering and damaging the equipment.